Thermosiphon

Solahart L Series Thermosiphon

 

The Solahart L Series is a roof mounted, open circuit solar water heater specifically designed to provide economical service in medium to high solar gain areas. It is not recommended for use in frost or poor water chemistry areas.

The L Series is ingenious in its simplicity. The black polyester powder coated aluminium absorber collects the sun's heat and transfers it to the water in the 7 risers. Copper is used for the risers for its high thermal conductivity ensuring the maximum amount of heat energy is passed to the water. As the water in the risers is heated, it rises into the tank to be replaced by cooler water from the tank. The solar heated water is then stored ready for use - hot water free from the sun.

The L Series has a double coated ceramic lined tank with a protective anode. The L Free heat offers an extended warranty and features additional protection. The tank is equipped with an electric booster, alternatively an in-line gas booster is available.

L and L Free Heat systems can be installed with an optional TRV over temperature protection system to minimise over performance during peridos of higher solar radiation and lower hot water draw off.

 

Click Here for L Brochure

Click Here for LCSD Brochure

 

Feature and benefits

 

Features

  • Stylish slimline designL Series Thermoshiphon
  • Thermosiphon operation minimises maintenance   
  • Gas or electric booster models available
  • Double coated ceramic lined tank
  • Enhanced protection on Free Heat model
  • TRV over temperature protection available

Benefits

  • Can save up to 50% to 85% of water heating energy consumption*
  • Reliable, low maintenance operation
  • Hot water regardless of the weather
  • Can qualify for valuable government environmental incentives*
  • Reduced energy use can save up to 1.9 to 3.0 tonnes of CO2 emissions per annum*
  • Peace of mind with 10/5/5† (L Free Heat) and 5/5/5† (L Series) year warranties
  • Free Heat series available in 180 and 300 litre capacities

 

Tank Model

180

300

440

Tank Capacity (litres)

180

300

440

Collectors (number)

1

2

3

3

4

Boost Capacity (litres)

90

150

150

220

220

Weight - Empty (kg)

92

151

184

250

260

Weight - Full (kg)

275

457

493

676

712

Width (m)*

1.67

2.48

3.37

3.49

4.44

Length (m)*

2.53

2.53

2.53

2.53

2.53

 

 

*Energy savings of up to 50% to 85% shown are based on Australian Government approved TRNSYS simulation modelling using a medium load.  Savings and incentives will vary depending upon your location, type of Solahart system installed, orientation and inclination of the solar collectors, type of water heater being replaced, hot water consumption and fuel tariff. Maximum financial savings off your hot water bill are achievable when replacing an electric water heater on continuous tariff.

†Warranty Details: 10/5/5 - 10 year cylinder and collectors supply, 5 year parts, 5 year labour; 5/5/5 - 5 year cylinder and collectors supply, 5 year parts, 5 year labour.

Technical details

 

* A distance equal to the tank length should be left on the water connections side of the system plus 1.0m should be left on the other three sides of the installation for safe access and servicing.

The L and L Free Heat systems (if installed with a TRV over temperature protection system) can be installed as a solar preheater with an inline Solahart gas booster water heater.

 


 

 

Solahart SP Series Thermosiphon

 

The SP series features the Australian designed and manufacured Envelope solar collector, offering the latest in styling and all weather durability, and with five patents pending has been designed to meet or exceed Australian and International Standards in areas of strength and durability. The SP Series black polyester powder coated absorber maximises the transfer of available solar energy while the closed circuit design makes it suitable for frost prone and poor water chemistry areas.

The SP series utilises Solahart's revolutionary multi-flow collector which uses a huge 35 risers to extract the maximum amount of energy from the sun which heats the Hartgard fluid in the collector. This Hartgard rises into the heat exchanger where the heat is transferred to the water inside of the tank.

The system has a double ceramic lined tank and a protective sacrificial anode and the SP Free Heat features additional protection. The tank is equipped with an electric booster, alternatively an in-line gas booster is available.

SP and SP Free Heat systems can be installed with the optional HartStat OTP (over temperature protection) system to minimise over performance during periods of higher solar radiation and lower hot water draw off.

 

Click Here for SP Brochure

 

Benefits and features

 

Features

  • Optimum performance in medium and high solar gain areasJ Series Thermosipon
  • Suitable for frost prone or harsh water areas
  • Stylish slimline design
  • Thermosiphon operation minimises maintenance
  • Gas or electric booster models available
  • Double coated ceramic lined tank
  • Enhanced protection on Free Heat model

Benefits

  • Can save up to 50% to 85% of water heating energy consumption*
  • Reliable, low maintenance operation
  • Hot water regardless of the weather
  • Can qualify for valuable government environmental incentives*
  • Reduced energy use can save up to 1.7 to 3.1 tonnes of CO2 emissions per annum*
  • Peace of mind with 10/5/5† (J Free Heat), 5/5/5† (J Series) year warranties
  • Free Heat series available in 300 litre capacity

 

 

Tank Model

180

300

440

Tank Capacity (litres)

180

300

440

Collectors (number)

1

2

3

3

Boost Capacity (litres)

90

150

150

220

Weight - Empty (kg)

108

187

229

290

Weight - Full (kg)

292

495

541

730

Width (m)*

1.62

2.43

3.38

3.49

Length (m)*

2.63

2.63

2.63

2.63

 

 

 

*Energy savings of up to 50% to 85% shown are based on Australian Government approved TRNSYS simulation modelling using a medium load. Savings and incentives will vary depending upon your location, type of Solahart system installed, orientation and inclination of the solar collectors, type of water heater being replaced, hot water consumption and fuel tariff. Maximum financial savings off your hot water bill are achievable when replacing an electric water heater on continuous tariff. †Warranty Details: 10/5/5 - 10 year cylinder and collectors supply, 5 year parts, 5 year labour; 5/5/5 - 5 year cylinder and collectors supply, 5 year parts, 5 year labour.

Technical details

* A distance equal to the tank length should be left on the water connections side of the system plus 1.0m should be left on the other three sides of the installation for safe access and servicing.

The J and J Free Heat systems (if installed with a HartStat OTP system) can be installed as a solar preheater with an inline Solahart gas booster water heater.

 


 

Solahart SC Series Thermosiphon

 

The Solahart SC Series is a roof mounted, closed circuit solar water heater specifically designed to provide higher efficiency for use in low to medium solar gain areas.

The SC series features the Australian designed and manufacured Envelope solar collector, offering the latest in styling and all weather durability, and with five patents pending has been designed to meet or exceed Australian and International Standards in areas of strength and durability. The SC collector's higher efficiency absorber with its Chrome Black Selective Surface maximises the absorption of available solar energy while the closed circuit design makes it suitable for frost prone or poor water chemistry areas.

The SC Series features Solahart's revolutionary multi-flow collector which uses a huge 35 risers to extract the maximum amount of energy from the sun. This is used to heat the Hartgard fluid in the collector which rises into the heat exchanger where the heat is transferred to the water inside of the tank.

The double ceramic lined tank has a protective anode and the SC Free Heat series features additional protection. The tank is equipped with an electric booster, alternatively an in-line gas booster is available.

SC and SC Free Heat systems are installed with the HartStat OTP (over temperature protection) system to minimise over performance during periods of higher solar radiation and lower hot water draw off.

Feature and benefits

 

Click Here for SC / SP Brochure

 

Benefits and features

 

Features

  • Highly efficient Black Chrome Selective Surface collector for optimum heat absorbtion
  • Multi-flow closed circuit operation makes it suitable for frost prone or harsh water areas
  • Stylish slimline design
  • Thermosiphon operation minimises maintenanceSC Thermoshiphon
  • Gas or electric booster models available
  • Double coated ceramic lined tank
  • Enhanced protection on Free Heat model
  • Over Temperature Protection as standard (for Australian market)

Benefits

  • Can save up to 55% to 90% of water heating energy consumption*
  • Reliable, low maintenance operation
  • Hot water regardless of the weather
  • Can qualify for valuable government environmental incentives*
  • Reduced energy use can save up to 2.0 to 3.6 tonnes of CO2 emissions per annum*
  • Peace of mind with 10/5/5† (KF Free Heat) and 5/5/5† (KF Series) year warranties
  • Free Heat series available in 300 litre capacity

*Energy savings of up to 55% to 90% shown are based on Australian Government approved TRNSYS simulation modelling using a medium load. Savings and incentives will vary depending upon your location, type of Solahart system installed, orientation and inclination of the solar collectors, type of water heater being replaced, hot water consumption and fuel tariff. Maximum financial savings off your hot water bill are achievable when replacing an electric water heater on continuous tariff. †Warranty Details: 10/5/5 - 10 year cylinder and collectors supply, 5 year parts, 5 year labour; 5/5/5 - 5 year cylinder and collectors, 5 year parts, 5 year labour.

 

 

Tank Model

180

300

440

Tank Capacity (litres)

180

300

440

Collectors (number)

1

2

3

3

Boost Capacity (litres)

90

150

150

220

Weight - Empty (kg)

117

197

244

305

Weight - Full (kg)

310

516

567

775

Width (m)*

1.62

2.43

3.38

3.49

Length (m)*

2.63

2.63

2.63

2.63

 

 

* A distance equal to the tank length should be left on the water connections side of the system plus 1.0m should be left on the other three sides of the installation for safe access and servicing.

The SC and SC Free Heat systems (if installed with a HartStat OTP system) can be installed as a solar preheater with an inline Solahart gas booster water heater.